Tension Control Bolts

Reference illustration — produced to your drawing

Bolts

Tension Control Bolts

A structural bolt with a splined tip that breaks off when the correct preload is reached. The break-off tip confirms tension without torque measurement.

Used in structural steel connections where reliable preload is required. Bought by structural steel fabricators and erectors.

This is one of the types covered by our Custom Bolts page — materials, tolerances, lot sizes and how we quote the whole family.

Typical price US$0.20 – US$3.50 per piece at 100–1,000 pcs — final price depends on material, tolerance and finish, and is confirmed by quote.

Standard

ASTM F1852

Size range

M16 – M30 · 5/8 – 1-1/4 in

MOQ

From 50 pcs

Lead time

Samples 5–10 days

What we produce

  • Carbon steel, heat treated
  • Hex head with splined break-off tip
  • Metric coarse or UNC threads
  • Plain or galvanized finish

Specification notes

  • Common lengths from 40 mm to 150 mm
  • Pairs with a hardened nut and washer
  • Splined tip shears at the design preload

Specifications

Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.

StandardASTM F1852
Size rangeM16 – M30 · 5/8 – 1-1/4 in
ThreadsMetric coarse · UNC
Head / geometryHex head with a splined tip that shears at a set preload; installed with a shear wrench
MaterialsStainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium
FinishesAs machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network)
Precision±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions
MarkingHead marking, grade marking or your own identification mark per drawing
DocumentsMaterial certificate (MTR) with every batch, plus pre-shipment photos before dispatch
MOQFrom 50 pieces per type and material · samples from 1 piece
Sample lead time5–10 days
Production lead time25–35 days after sample approval
QuoteWithin 24 hours, with DFM feedback

Standard dimensions

Metric hex head bolts and screws — nominal dimensions (ISO 4014 / ISO 4017)

dPitch (mm)s (mm)k (mm)e (mm)
M50.883.58.79
M61.010411.05
M81.25135.314.38
M101.5166.417.77
M121.75187.520.03
M162.0241026.75
M202.53012.533.53
M243.0361539.98
M303.54618.750.85
M364.05522.560.79

d = nominal thread diameter · s = width across flats · k = head height · e = width across corners. Nominal values; your drawing always takes precedence.

Other bolts we manufacture

See all 179 part types →

Send us the drawing

We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.

Request a quote