Grooved Dome Closed-End Blind Rivets

Reference illustration — produced to your drawing

Rivets

Grooved Dome Closed-End Blind Rivets

Grooved dome closed-end blind rivets have a domed head and a closed tail, with lengthwise grooves on the body that key into the sheet during setting. The grooves increase the lock between rivet and sheet for higher joint strength.

Used where a strong, sealed, one-side fixing is needed in enclosures, cabinets, and light structural assemblies. Buyers are sheet metal fabricators and cabinet makers.

This is one of the types covered by our Custom Fasteners page — materials, tolerances, lot sizes and how we quote the whole family.

Typical price US$0.50 – US$15.00 per piece at 100–1,000 pcs — final price depends on material, tolerance and finish, and is confirmed by quote.

Standard

To your drawing

Size range

Body diameter 3.2 – 6.4 mm · 1/8 – 1/4 in

MOQ

From 50 pcs

Lead time

Samples 5–10 days

What we produce

  • Grooved body keys into the sheet when set
  • Closed tail seals the joint
  • Aluminium or stainless steel 304/316 body
  • Steel or stainless mandrel
  • Dome head finish
  • Stronger lock than plain open end rivets

Specification notes

  • Groove pattern per manufacturer drawing
  • Closed end keeps the mandrel retained
  • Grip range matched to sheet thickness

Specifications

Every line below is a starting point, not a limit. Non-standard sizes, special threads and unusual materials are what we do — send the drawing and we confirm what fits.

Size rangeBody diameter 3.2 – 6.4 mm · 1/8 – 1/4 in
ThreadsNot applicable
Head / geometryDome head with grooved closed-end body; break mandrel set
MaterialsStainless steel 301 / 303 / 304 / 304L / 316 / 316L / 410 / 416 / 17-4PH · carbon steel 1045 / 1215 / 12L14 · alloy steel 4130 / 4140 · aluminium 2024 / 5052 / 6061 / 7075 · brass · bronze · copper · titanium
FinishesAs machined · black oxide · zinc plating · nickel plating · chrome plating · anodizing · passivation (through our vetted partner network)
Precision±0.01 mm on features that locate, seal or fit; ISO 2768-m for general dimensions
MarkingHead marking, grade marking or your own identification mark per drawing
DocumentsMaterial certificate (MTR) with every batch, plus pre-shipment photos before dispatch
MOQFrom 50 pieces per type and material · samples from 1 piece
Sample lead time5–10 days
Production lead time25–35 days after sample approval
QuoteWithin 24 hours, with DFM feedback

Other rivets we manufacture

See all 179 part types →

Send us the drawing

We reply within 24 hours with DFM feedback, a process route and a price. Samples from 1 piece, production from 50 pieces, shipped from Qidong City, Jiangsu Province, China.

Request a quote